Cardboard & Cap Peg Rack

Make a Cardboard and Plastic Cap Peg Rack at The Cardboard CollectiveNow that my daughters are almost 2 and almost 4 they’ve started borrowing my jewelery. I’m not quite sure what that means about my taste in jewelery, but they are scaling my 4 foot high bookshelf  to get to it. As a compromise, I’ve decided to sacrifice access to some of my sturdier, more sought after necklaces in the hopes of safeguarding some of the more fragile and precious stuff.

Make a Cardboard and Plastic Cap Peg Rack at The Cardboard Collective

Contraband jewelery stuffed into little boxes, purses and paper bags was popping up all over the house…. as if a colony of Leprechauns had taken up residence. In an effort to deter further looting, I bargained that some kind of necklace depot would distract them….

Make a Cardboard and Plastic Cap Peg Rack at The Cardboard Collective

I started with just one box, which gave me 6 lengths of cardboard approximately the same length. I then assembled my caps.

Make a Cardboard and Plastic Cap Peg Rack at The Cardboard Collective

I had a variety of laundry soap and maple syrup caps and some of the caps magically fit together, but some did not. I ended up using Washi tape to secure them. I didn’t have enough caps, so I borrowed a cylindrical block from the block bin. You can use whatever you have on hand for this project, it doesn’t have to be plastic caps. Blocks, corks, tiny plastic or glass bottles; all can do the job. Make a Cardboard and Plastic Cap Peg Rack at The Cardboard Collective

Next step was arranging the caps and tracing around them. I used a box cutter to carefully cut around the circles on the top layer, and then a serrated knife for the layers below. It’s helpful to try and cut just inside the area that you traced for a snug fit.

Make a Cardboard and Plastic Cap Peg Rack at The Cardboard Collective

Last step was gluing the layers together. I used one layer as a backing and didn’t cut any holes in that layer. I also spread a thin layer of glue slightly diluted  with water over the top piece of cardboard to preserve it and keep it from showing dirt and fingerprints. To hang the rack I threaded paper cord through the corrugated channels and tied it off.

Cardboard and Cap Ped Rack DIY at The Cardboard Collective

The Cardboard Collective

A truce? Only time will tell…..

5 thoughts on “Cardboard & Cap Peg Rack

  1. Can’t believe those sweet little girls would be scaling furniture to get to things like jewelry! They sound like they have inherited the genes for acrobatics! What a clever solution but, I agree with you, it is only a matter of time before they strike again!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>